Posts tagged ‘recycle’

How to Make a Tiny Terrarium in a Light Bulb

Ahoy there Hipster Homers! I’m Julie and I’m the very first guest blogger on this fine site. Today’s project involves breaking stuff, plants, found objects, and miniatures. Fun, right?

Let’s get started! We’re going to go through the steps to create your very own little terrarium. I like building terrariums inside of lightbulbs because of the inherent challenge of working in such a small space as well as how the simple, industrial beauty of a light bulb complements the intricacy of natural elements. (I was inspired to try this out after seeing this post on Apartment Therapy a couple of months ago.) We’ll get into the nitty gritty of how to make one of these. But first, let’s go through some key dos and don’ts of light bulb terrariums. I assembled these tips and warnings through extensive trial and error as well as helpful advice from the folks at Flora Grubb Gardens and Hortica in San Francisco.

Dos and Don’ts:

  • Do use sand or small pebbles; these are good because water drains through them easily. (Wet soil will get moldy in a confined area. You don’t want this.)
  • Do use Tillandsia, also known as air plants; these are a great choice for your tiny terrarium because they take all the nutrients they need from the air and a small amount of water. No roots means no wet soil which means no mold. You can buy tillandsia at garden stores or online.
  • Do choose preserved moss instead of live moss. Preserved moss isn’t living, but it will hold moisture; this moisture raises the humidity level in the terrarium, which makes the tillandsia happy. You can find sheet moss, reindeer moss, and other preserved mosses at garden and floral stores.
  • Do keep your terrarium in partial sunlight.
  • Do give your terrarium some water. The tillandsia is alive and will need a small amount of water to stay that way. Water it by either removing it and soaking it in water once a week or, using a spray bottle, give it a small spritz of water every week or two. Pour out any excess water.
  • Do feel free to use little rocks, pieces of glass, or any other bits of things to help give your terrarium character. DON’T:
  • Don’t use soil. Again, you don’t want a soupy, moldy terrarium. That would be gross.
  • Don’t use live moss. Moss is really picky and isn’t likely to survive well in this environment.
  • Don’t keep your terrarium in the dark.
  • Don’t keep your terrarium in full sunlight, either.

How To: You’ll need a few tools to make a tiny terrarium but nothing complicated to get started.

  • Needle-nose pliers
  • Scissors
  • Long tweezers or chopsticks
  • Flathead screwdriver
  • Glasses or goggles

Let’s start with the light bulb. I like the globe kind that are used to light bathroom vanities. You can buy them at any hardware store, or preferably, use one that’s burned out to save resources. For those of us in northern California, one option for buying burned out bulbs (if you don’t have any on hand) is the East Bay Depot for Creative Reuse in Oakland. Don’t use “soft white” bulbs or else your terrarium will just look like January in Minnesota. I don’t think this is what you’re going for.

We will be removing the inside parts of the lightbulb. This step involves breaking glass, so wear glasses or goggles to protect your eyes. I recommend doing this over a box to contain any flying pieces of broken glass. And, obviously, this is an “adults only” kind of task.

First, remove the metal tip from the bottom of the bulb. Using needle-nose pliers, carefully nudge the sides of the metal tip from the black glass part.

Then, when enough of the sides are raised to get a good grip on them, hold one of the sides with your pliers and yank out the metal tip. You will feel a couple little wires snap when you do this.

Next remove the black glass. Hold one side of the glass with the pliers and firmly twist up to snap the glass. Repeat around the other sides and pull out any remaining bits of black glass. This glass is pretty thick and will take some force to break it; so be careful and hold onto the bulb firmly.

Now you will be able to see the interior parts of the light bulb.

Using the flathead screwdriver as a sort of lever, snap the interior tube from the side. It will make a totally satisfying little sound as the argon escapes. Then twist the screwdriver around to smash the containing tube. It takes some force to do this; be careful, but also don’t be afraid of the bulb itself breaking. It probably won’t. Hold tight to the bulb while you do this.

Pull out any remaining wires with the pliers.

If there are any last bits of glass around the interior edge, break these off with the screwdriver.

And now you have an empty light bulb! That is definitely the hardest part of the endeavor. Next, put adhesive silicone bumpers on the side of the bulb to keep it steady.

We’ll use sand as a substrate for the terrarium. You can buy it at a garden store or collect it from a beach. If you use beach sand you will need to thoroughly rinse it to remove any salt. The sand in this tutorial is from the beach, so our first step is to rinse it.

To dry it, either spread it in a thin layer on a cookie sheet and leave it sitting for a few days, or dry it in the oven at 300 degrees. Be careful taking it out, because it will, hopefully obviously, be pretty hot.

The sand should be completely dry before continuing.

Once it’s dry, put a couple tablespoons of sand into the lightbulb. Make this easier by either using a funnel or a folded piece of cardboard.

This terrarium includes preserved sheet moss, reindeer moss, and tillandsia.

Cut off a small bit of sheet moss and put in the bulb. Position it using a chopstick or long tweezers. Tear off a few small pieces of reindeer moss and add this, as well.

Put a tillandsia in the bulb, pushing the smaller end in first. Position the different elements to look nice together and add more moss or rocks if you’d like. It might take some poking to get everything in the right place; be patient and experiment with different arrangements.

For extra fun, tiny toy animals can enliven your terrarium. I used a miniature horse for this one, and stuck a piece of gold wire in its head to make it into a makeshift unicorn. Any other found objects, like rocks, sticks, marbles, etc., would also be fun. And voilà! You have a lovely terrarium. More of my lightbulb terrariums are online at and for sale on Etsy. I’d love to see your terrarium creations! Contact me at

A NOTE OF CAUTION FROM APRIL: Wise THH reader Shadus recommends using gloves when extracting the bulb guts. (S)he says “I would add– wear gloves while performing the delicate work on the bulb, they’re stronger than most people expect but a slip with the screwdriver could lead to a hand full of glass shards which is no fun and also doesn’t make for a nice evening at the hospital. Better safe than sorry!”

(All images Copyright Juliette Melton)

A Tutorial: The Upcycled Christmas Ornament

Good gracious I LOVE getting mail. But dang it if there isn’t a spoilsport in the mailbox here at The Hipster Home. Of what do I speak? Ohh you know, those junk ad bundles with the coupons to Anna’s Linens and LensCrafters! Those things are made out of the cheapest paper, are just terribly designed and don’t arrive without being a half crinked, wrinkly mess. And I’m always a little worried that there is other perfectly good mail caught in them since these ads pass swiftly from my hands into outbox: recycling bin. I’ve always thought “Wouldn’t it be nice to use those terrible ads to make something? They’re free, we get so many of them and it’d be almost profound to make something useful out of such waste.” And so my Freshly Blended ornament swap inspiration was born. While it is true that I used a holiday Target catalog for the ornaments I sent to my swap-mates, you can make these little guys for your home tree out of any colorful junk mail you receive. Oh sweet Hipster Home, where even mail spam is craft material!

What you’ll need:

  • junk mailers or a catalog
  • festive ribbon
  • ornament shape template, printed
  • paper clips, 4 per ornament
  • scissors
  • a threaded sewing machine
  • a ruler
  • a pencil

Directions: Print (or create) a shape template for your ornament. I’ve got a PDF of my shape available to you, but you can make your own. Since you want the ornament to be even all around, you only need half of a template. If you opt to make your own shape, I recommend folding a piece of paper horizontally  then vertically. You can cut along the open edges and when its unfolded you’ll have a perfectly symmetrical shape that would probably look rad. The remainder of the instructions below are for my ornament shape but if you can use this as a guide if you decide to try a wackier shape.

Cut an approximately 2.5 x 5.5 inch strip of stiff paper. You’ll use this rectangle as a guide for cutting out 8 pieces of junk mail and 1 stiff rectangle (like a catalog cover) per ornament.

Make an ornament sandwich: 4 lightweight rectangles, 1 stiff paper rectangle in the middle and another 4 lightweight rectangles. Secure on 4 corners with paperclips.

Cut a 4-inch ribbon. Fold it in half and slip the ribbon ends into the ornament sandwich. You’ll want to put one end in front of the stiff paper in the middle and the other ribbon end in back of the stiff paper. Secure it with a paper clip. The stiff paper base in the middle of your ornament makes it easier to fold and fan the lightweight paper when the time comes.

Using a ruler, eyeball where the center of the paper is and trace a line from the top of the ornament sandwich to the bottom lengthwise.

Set your sewing machine stitch length to 5.0. If the stitch length is too close together, the paper will perforate right up the middle and you don’t want that. Starting opposite your ribbon loop, sew up the traced line, reversing your stitch a little once you reach the top. This will prevent stitch unraveling. Be careful not to stitch the paperclips and take them out when the paper is secure.

Line up your template with the center stitched line and trace your half ornament template onto the paper. Flip the template over the sewed center and trace the other half of the ornament. You should now have the ornament outline traced onto the top paper of the ornament sandwich.

Cut out the ornament along the traced line. When you’re done, your ornament should look like the above ornaments!

To fold your ornament so it fans out from the center, hold the sturdy middle sheet and use your fingers to fold the first sheet of paper into itself, over the sewn seam. Keep folding the sheets until you reach the middle and repeat on the other side of the ornament.

Chances are that the fans will be uneven but you can bend until evenly spaced.

Repeat until you’ve got a tree full of ’em!

As you can see, I mailed the ornaments in the calendar envelopes from my first post ever. I don’t think it gets more festive than this! If you make these ornaments yourself, be sure to show me your results. Happy holidays, ya’ll!

Related Posts Plugin for WordPress, Blogger...